LT-IGST2206F 4+2 Port Gigabit Industrial Managed Switch
The LT-IGST2206F is a fully gigabit managed industrial switch designed by NEWBRIDGE® for harsh environment applications. It features 4× 10/100/1000Mbps RJ45 ports and 2× 100/1000Mbps SFP fiber slots – all ports support non‑blocking wire‑speed forwarding. Built to operate reliably from -40°C to +75°C using industrial‑grade components and natural heat dissipation (fanless), it meets the demands of intelligent transportation, rail transit, power, mining, oil & gas, shipping, metallurgy, and green energy. The IP30‑rated metal housing protects against dust and small objects.
The switch supports wide voltage input (9.6V to 60VDC) with triple power redundancy (two sets of V+/V- terminals plus one DC input, Phoenix connector) to maximize uptime. WEB management (HTTPS) provides secure network management, including port management, IEEE 802.1Q VLAN, static link aggregation, port mirroring, loop protection, IGMP snooping v1/v2, QoS (8 queues/port, 802.1p/DSCP), storm control, port isolation, DHCP snooping, and one‑click restore.
With 6KV lightning protection, overload protection (20A), reverse polarity protection (30s), and a 2‑year warranty, this switch delivers a cost‑effective, stable, and reliable industrial communication network.
Key Features
🏭 Industrial Design & Wide Temperature
Operating temperature: -40°C to +75°C – fanless, natural heat dissipation, industrial‑grade components.
IP30 metal housing, DIN rail mounting.
6KV lightning protection on ports.
🔌 Triple Power Redundancy & Protections
Wide voltage input: 9.6V – 60VDC (2× Phoenix terminal pairs + 1× DC input).
Overload protection (20A), reverse polarity protection (30s).
Redundant power input ensures seamless failover.
🌐 Full Gigabit & SFP Uplinks
4× 10/100/1000Base‑T RJ45 ports + 2× 100/1000Base‑X SFP slots.
Switching capacity: 12Gbps; forwarding rate: 8.928Mpps; MAC table: 4K; packet buffer: 2M.
🧠 Web Management & L2 Features
Web GUI (HTTPS) – easy configuration and maintenance, one‑click restore.
IEEE 802.1Q VLAN (port‑based), port isolation.
Static link aggregation – increase bandwidth and redundancy.
Loop protection and anti‑loop – prevents network loops.
IGMP snooping v1/v2 (256 multicast groups) – optimizes multicast traffic.
QoS – 8 queues per port, Diff‑Serv, priority based on port/802.1p/DSCP, Priority Mark/Remark.
Port mirroring – traffic monitoring.
Storm control (broadcast/unknown unicast/unknown multicast), port speed limit.
DHCP snooping – enhances security.
🔌 Plug‑and‑Play & Easy Installation
No configuration required for basic switching; advanced features via Web.
LED indicators for power (PWR), system (SYS), link/activity, and SFP.
Power consumption: <5W.
🛡️ Reliable & Warranty
2‑year warranty.
Designed for intelligent transportation, rail, power, mining, oil, shipping, metallurgy, green energy.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | LT-IGST2206F |
| Ports | 4× 10/100/1000Mbps RJ45 + 2× 100/1000Mbps SFP slots |
| PoE | Not supported (non‑PoE) |
| Switching Capacity | 12Gbps |
| Forwarding Rate (64Byte) | 8.928Mpps |
| MAC Table | 4K |
| Packet Buffer | 2M |
| Network Media | Cat5e/6 for Gigabit, up to 100m; fiber depends on SFP module |
| Management | Web (HTTPS), one-click restore |
| VLAN | IEEE 802.1Q port‑based |
| Link Aggregation | Static trunk |
| Multicast | IGMP snooping v1/v2 (256 groups) |
| QoS | 8 queues/port, 802.1p/DSCP, Diff‑Serv |
| Security | Port isolation, storm control, port speed limit, DHCP snooping, loop protection |
| Diagnostics | Port mirroring |
| Power Input | 9.6V – 60VDC (triple redundant: 2× Phoenix terminals + 1× DC input) |
| Overload Protection | 20A |
| Reverse Polarity Protection | 30s |
| Lightning Protection | 6KV (ports) |
| Protection Rating | IP30 |
| Operating Temperature | -40°C ~ +75°C |
| Storage Temperature | -40°C ~ +75°C |
| Dimensions | 188×130×50mm |
| Housing | Metal, fanless |
| Installation | DIN rail |



